KVH Industries TracVision R4 User Manual
Page 32
This information has to be entered for each of the following
categories:
•
vertical high
•
vertical low
•
horizontal high
•
horizontal low
or
•
right
•
left
TracVision R5/R4 requires that the data fields for all transponder
categories be provided. If the selected satellite does not have
information for one or more of the transponder categories,
default information should be entered in the fields as follows:
Transponder Data
Default Value
Frequency
00000
Symbol Rate
27500
FEC Code
the same value as provided for those
transponders with data
Network ID
0x0000
Polarity and Band
whichever combinations are not
already provided
5. Type
@SAVE,A
and press Enter to save your
settings (or
@SAVE,B
if data is for User2
satellite.)
6. Type
@DEBUGOFF
and press Enter.
7. Type
ZAP
and press Enter to restart the system.
One of your user-defined satellites has now been added to the
TracVision R5/R4 satellite library. This satellite will now be
available the next time you use the SATINSTALL command.
2-21
Installation
54-0157 Rev. H
Table 2-6
Default Transponder Values