KVH Industries TracVision R4 - Manual (Page 54)

5-1
Maintenance
54-0157 Rev. H
5 Maintenance
5.1 Warranty/Service Information
For information on KVH warranty, repair, and liability policies,
please refer to the complete warranty statement provided with
your KVH product. If you have any questions, please call your
local authorized dealer/installer or distributor, or contact KVH or
KVH Europe directly.
5.2 Preventive Maintenance
TracVision R5/R4 requires minimal preventive maintenance. The
following tasks are sufficient to maintain peak performance.
Monthly
• Wash the exterior of the radome and baseplate
assembly with fresh water; a mild detergent may
be added to remove grime. Do not spray the
radome directly with high-pressure water.
• Do not apply abrasive cleaners or volatile solvents
such as acetone to the ABS radome.
Annually
• Remove the radome and examine the interior of
the antenna unit for signs of corrosion, loose
connections, or frayed or broken wires.
• Visually inspect the elevation drive shaft to be
certain that it moves easily and is clear of grit and
debris.
When cleaning the radome, avoid
any compounds that react with
plastic.