Kobe Range Hoods CH0030SQB - Manual (Page 13)

11
8. Slide the duct cover onto the hood.
Attach screws from underneath the hood
to the duct cover.
Install Accessories
9. Attach oil tunnel. Refer to Figure 16.
10. Refer to Figure 17. Slide the baffle
filter into the hood. Push the baffle filter
upward.
Slide forward. Pull
downward. Fit into place.
11. For bottom casing, repeat above steps.
Refer to page 16.
Final Assembly
12. Turn power ON in control panel. Check
all lights and fan operation.
13. Make sure to leave this manual for the
homeowner.
Figure 16
Figure 17