Kodak Ektapro Slide Projector 4020 - Manual (Page 83)

LOWER HOUSING
1 . Remove the UPPER HOUSING. See page 4-1.
2 . Remove the CENTER HOUSING. See page 4-4.
3 . Remove the FAN, KEYBOARD PCB and TRAY MOTION PCB. See page 4-9
4 . Remove the TRANSFORMER, POWER SUPPLY PCB and BACK PANEL ASSEMBLY. See page 4-11.
5 . Remove the MECHANISM FRAME and LENS MOUNT. See page 4-13.
6 . Disconnect all CONNECTORS from MASTER PCB. See page 4-23:
7 . Remove the 2 SCREWS and the LAMP HOUSING ASSEMBLY.
8 . Remove the HANDLE.
9 . Remove the 2 ELEVATOR RETAINERS, the right and left ELEVATOR KNOB, the right and left
ELEVATOR and the 2 RUBBER FEET.
LAMP HOUSING
ASSEMBLY
SCREW (2)
ELEVATOR RETAINER (2)
ELEVATOR KNOB (2)
ELEVATOR (2)
RUBBER FOOT (2)
HANDLE
figure 4-29
SM2547-1 Service Manual
Kodak AG, Stuttgart 4-25 03/98