Kenwood TK-2140 - Manual (Page 15)

10
If you are not using the optional
KMC-25 speaker/ microphone,
install the cover over the
univeral connector using the
supplied 4 x 6 mm dressed
screw.
I
NSTALLING THE
C
OVER OVER THE
U
NIVERSAL
C
ONNECTOR
I
NSTALLING THE
(O
PTIONAL
KMC-25) S
PEAKER
/ M
ICROPHONE
1 Insert the guide of the speaker/ microphone
connector into the groove of the universal connector.
2 Secure the connector in place using the attached
screw.