Kenwood TK-2140 - Manual (Page 37)

32
■ Automatic Status Response
If you pre-select a status number and then leave the
transceier in Status Mode, the transceiver will
automatically respond with that status number when
a request from the base station is received. (The
base station request function is optional.)
O
PTIONAL
S
HORT
M
ESSAGES
F
EATURE
Received short messages (maximum of 48 characters)
are displayed the same as Status messages {page 29},
however only four (4) short messages can be stored in
the stack memory. “M” (Message) and the message
number appear with the message.