Kathrein UFS 712sw - Manual (Page 15)

15
Satellite and position
Use the

buttons to select the desired
satellite whose signal is to be received by the tuner.
When you have selected your desired satellite, use
the

buttons to switch to the selection of the
“LNB type”.
DiSEqC™ Switch
Select the setting here to match your reception system using the

buttons. If your reception
system is DiSEqC™-capable, select “ON” at the “DiSEqC™ switch” selection (allows switch-over from
receiving one satellite to receiving another one). If your reception system is DiSEqC™-capable, allow the
default setting “OFF” to remain. Press the

button to move to the next menu item.
For ease of understanding, the further explanations of the fi rst installation are split into two columns.
The description on the left refers to installation of a non-DiSEqC™-capable system and on the
right to installation of a DiSEqC™-capable system.
FIRST INSTALLATION
Number of satellites
Press the

button to select the satellite to be
received.
The following display appears:
When selecting the satellite(s),
make sure that your reception
position is aligned to the desired
satellite(s)!