Rear seats, Second-row adjustable head restraints, Seating and safety restraints – Lincoln 2011 MKZ Hybrid User Manual

Page 139

Advertising
background image

• the key is placed in the ignition.
The easy entry feature can be turned off or on through the vehicle
message center. Refer to Message center in the Instrument Cluster
chapter.

REAR SEATS

Note: Do not block the air inlet at the front facing of the rear seat
cushion. The air needs to be able to flow through the air inlet without
any obstruction in order to ventilate the high voltage battery.
Obstructions to the air inlet may cause vehicle performance to decrease.

Second-row adjustable head restraints

Your vehicle is equipped with outboard and center head restraints that
are vertically adjustable.

WARNING: To minimize the risk of neck injury in the event of a
crash, the driver and passenger occupants should not sit in

and/or operate the vehicle, until the head restraint is placed in its
proper position. The driver should never adjust the head restraint
while the vehicle is in motion.

Outboard head restraints

The outboard adjustable head
restraints consist of:
• a trimmed energy absorbing foam

and structure (1),

• two steel stems (2),
• a guide sleeve adjust/release

button (3),

• and a guide sleeve unlock/remove

button (4).

To adjust the outboard head restraints, do the following:

1. Raise the head restraint by pulling up on the head restraint.

2. Lower the head restraint by pressing and holding the guide sleeve
adjust/release button and pushing down on the head restraint.

Properly adjust the head restraint so that the top of the head restraint is
even with the top of your head and positioned as close as possible to the
back of your head. For occupants of extremely tall stature, adjust the
head restraint to its full up position.

1

2

3

4

Seating and Safety Restraints

139

2011 MKZ Hybrid (hkz)
Owners Guide, 1st Printing
USA
(fus)

Advertising