Bounce-back, Security override, Window lock – Lincoln 2011 MKZ Hybrid User Manual

Page 93: Accessory delay, Driver controls

Advertising
background image

• The

control can then be released and the windows will complete

the opening operation and fully vent the moon roof.

• If

or

is pressed during the opening operation, both windows

and moon roof movement will stop.

Note: The ignition must be in the off position and the accessory delay
feature must not be activated in order for this feature to operate.

Note: To disable this feature, contact your authorized dealer.

Bounce-back

When an obstacle has been detected in the window opening as the
window is moving upward, the window will automatically reverse
direction and move down. This is known as “bounce-back”. If the ignition
is turned off (without accessory delay being active) during bounce-back,
the window will move down until the bounce-back position is reached.

Security override

To override a bounce-back condition, within two seconds after the
window reaches the bounce-back position, pull and hold the switch up
and the window will travel up with no bounce-back or pinch
protection.
If the switch is released before the window is fully closed,
the window will stop. For example, this can be used to overcome the
resistance of ice on the window or seals.

Window lock

The window lock feature allows only
the driver and front passenger to
operate the power windows.

To lock out all the window controls
(except for the driver and front
passenger) press the right side of
the control. Press the left side to
restore the window controls.

Accessory delay

With accessory delay, the window switches, audio system and moon roof
(if equipped) may be used for up to 10 minutes after the ignition switch
is turned off or until either front door is opened.

Driver Controls

93

2011 MKZ Hybrid (hkz)
Owners Guide, 1st Printing
USA
(fus)

Advertising