Loewe Auro 2216 PS - Manual (Page 14)

- 14
Go to the ”Adjust loudspeaker level” item in the ”Speaker
System” window.
Press 4.
The ”Adjust loudspeaker level” window opens.
DVD menu
Adjust loudspeaker level
Back
End
Info
Level 0
You hear a noise in turn from every single loudspeaker start-
ing with the front left speaker. The speaker is highlighted in
white in the overview (see the figure) whilst the noise is being
emitted from it. You can reduce or increase the volume of this
loudspeaker whilst the noise is being emitted from it.
Listen to all the speakers once first. The perceived volume
should have the same intensity from all speakers.
Is one loudspeaker quieter than the others? Then, increase the
volume level of this speaker (4).
Is one loudspeaker louder than the others? Then, reduce the
volume level of this speaker (3).
Repeat the procedure until you are hearing all the speakers at
the same volume.
This completes the setting of your loudspeaker system. To close the DVD menu:
Press the button
.
See the section on audio functions (pg. 38).
Entering the distance between speakers
Open the “Loudspeaker System” menu as described on page
13.
Go to the item ”Listener/speaker Distances”.
Press 4
The ”Listener/Speaker distances” window opens.
DVD menu
Listener/speaker Distances
Back
End
Info
Distance A 2.1m
Distance B1
Distance B2
Distance C1
Distance C2
A
B1
C1 C2
B2
Set the right distance value A (distance listener from center
loudspeaker). You can change the distance in steps of 0.3 m.
Go to ”Distance B1” (distance of listener from left front
speaker) and set the right distance here, too.
Do the same for all connected speakers.
Press the button.
The ”Listener/Speaker distances” window closes. You are back
in the ”Speaker System” window.
Adjust loudspeaker level
With this dialog, you can compensate differences in volume between the indi-
vidual speakers. The basic volume of the speaker system should not be influ-
enced with this function.
Take up your normal listening position.
Set normal volume.
First installation