Little Wonder ZyAIR G-4100 - Manual (Page 24)

ZyAIR G-4100
24
2. Connect the screw (included) to the support holder.
3. Connect the support holder to the ZyAIR but do not tighten the screw.
4. Twist the support holder to the side.
5. Run the connection wires through the gap in the support holder
Figure 24 Support Holder Connections
6. Twist the support holder back to the vertical position and tighten the screw that connects the
support holder to the ZyAIR.
Figure 25 Support Holder Connection Pass Through
Wall-mounted
Follow the steps to attach your ZyAIR to a wall.