Setting the gap distance, Driver controls – Lincoln 2011 MKT User Manual

Page 125

Advertising
background image

The vehicle brakes will be automatically applied to slow the vehicle to
maintain a safe distance between the vehicle in front. The maximum
braking which is applied by the ACC system is limited and can be
overridden by the driver applying the brakes.

If the ACC system predicts that its
maximum braking level will not be
sufficient, an audible warning will
sound while the ACC continues to
brake. This is accompanied by the
heads-up display; a red warning bar
illuminating on the windshield. The driver should take immediate
action.

Note: The brakes may emit a sound when they are being modulated by
the adaptive cruise control system.

WARNING: Adaptive cruise control only warns of vehicles
detected by the radar sensor. In some cases there may be no

warning or the warning may be delayed. The driver should always
apply the brakes when necessary. Failing to do so may result in a
collision, serious injury or death.

Setting the gap distance

The distance between your vehicle
and the vehicle in front of you can
be decreased or increased by
pressing <---> control. GAP <--->
will be displayed in the message
center. Three gap distance settings
are available:

Driver Controls

125

2011 MKT (mkt)
Owners Guide, 1st Printing
USA
(fus)

Advertising