Deactivating/activating the belt-minder feature, Seating and safety restraints – Lincoln 2011 MKT User Manual

Page 205

Advertising
background image

Reasons given...

Consider...

“I have an airbag”

Airbags offer greater protection when
used with safety belts. Frontal airbags
are not designed to inflate in rear and
side crashes or rollovers.

“I’d rather be thrown clear”

Not a good idea. People who are
ejected are 40 times more likely
to DIE.
Safety belts help prevent
ejection, WE CAN’T “PICK OUR
CRASH”.

WARNING: Do not sit on top of a buckled safety belt or insert a
latchplate into the buckle to avoid the Belt-Minder

௡ chime. To

do so may adversely affect the performance of the vehicle’s airbag
system.

Deactivating/activating the Belt-Minder

feature

The driver and front passenger Belt-Minder

are

deactivated/activated independently. When deactivating/activating
one seating position, do not buckle the other position as this will
terminate the process.

Read Steps 1 - 5 thoroughly before proceeding with the
deactivation/activation programming procedure.

Note: The driver and front passenger Belt-Minder

௡ features must be

disabled/enabled separately. Both cannot be disable/enabled during the
same key cycle.

Note: If you are using MyKey™, the Belt-Minder

௡ cannot be disabled.

Also, if the Belt-Minder

௡ has been previously disabled, it will be

re-enabled during the use of MyKey™. Refer to MyKey™ in the Locks
and security
chapter.

The driver and front passenger Belt-Minder

௡ features can be

deactivated/activated by performing the following procedure:

Before following the procedure, make sure that:
• The parking brake is set
• The gearshift is in P (Park)
• The ignition is off
• The driver and front passenger safety belts are unbuckled

Seating and Safety Restraints

205

2011 MKT (mkt)
Owners Guide, 1st Printing
USA
(fus)

Advertising