Lexicon DD-8 - Manual (Page 15)

DD-8 Power Amplifiers
Operation Manual 15
appenDIX
Specifications
Specifications are subject to change without notice.
Output Power: 125W RMS per channel into 8 ohms from 20Hz – 20kHz
Frequency Response: 20Hz - 20kHz +0dB/–1.5dB
Total Harmonic Distortion (THD): Less than 0.05% at full rated power 20Hz - 20kHz
Signal-to-Noise Ratio: < –105dB below rated full power A-weighted
Crosstalk: < –70dB @ 1kHz
Input Sensitivity: 1.12 volts for 125W out into 8 ohms
Gain: 29dB
Input Impedance: 100K ohms typical
Trigger Input: 5V minimum – 15V maximum DC
Dimensions (H x W x D): 2.1” (w/ feet) / 1.7” (w/out feet) x 17.3” x 14.9”
5.4 cm (w/ feet) / 4.5cm (w/out feet) x 43.8 cm x 37.8 cm
Weight: 9.2 lbs (4.2 kg)
Power Requirements: 100 - 240VAC 50/60Hz 190W