Conventions utilisées dans le présent document, Remarque – Lexicon DD-8 User Manual

Page 47

Advertising
background image

Amplificateurs de puissance DD-8

Mode d'emploi

47

conventIonS utIlISÉeS DanS le prÉSent Document

Ce document contient des instructions d’ordre général concernant la sécurité, l’installation et le
fonctionnement de l’amplificateur de puissance DD-8. Il est important de lire ce manuel de l’utilisateur
avant d’essayer d’utiliser ce produit. Prêtez une attention particulière aux instructions concernant
la sécurité.

Les symboles suivants sont utilisés dans ce document :

Apparaît sur le composant pour indiquer la présence d’une tension dangereuse et non
isolée à l’intérieur du boîtier – tension qui peut être suffisante pour représenter un
risque de choc électrique.

Apparaît sur le composant pour indiquer des instructions importantes concernant le
fonctionnement et la maintenance dans la littérature qui s’y rapporte.

Attire l’attention concernant une procédure, l’utilisation, l’état ou d’autres situations de
ce genre qui, s’ils ne sont pas respectés ou effectués correctement, peuvent entraîner
des blessures voire le décès.

Attire l’attention concernant une procédure, une utilisation, un état ou d’autres
situations de ce genre qui, s’il ne sont pas respectés ou effectués correctement, peuvent
endommager ou détruire une partie ou la totalité du produit.

Attire l’attention concernant des informations qu’il est essentiel de mettre en évidence.

REMARQUE :

FCC COMPLIANCE NOTICE

This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

ATTENTION

AVERTISSEMENT

Advertising