Lenovo RD210 - Manual (Page 48)

Table 3. SW3 switch block definition (continued)
Switch
number Default position Description
6 Off When you toggle this switch to On,
this causes a forced power-on which
overrides the power-on and
power-off button on the server and
they become nonfunctional.
7 Off Reserved.
8 Off Reserved.
Important:
1. Before you change any switch settings or move any jumpers, turn off the server;
then, disconnect all power cords and external cables. See safety information in
“Safety” on page vii.
2. Any system-board switch or jumper blocks that are not shown in the illustrations
in this document are reserved.
32 ThinkServer RD210 Types 3795, 3796, 3818, and 3819: Installation and User Guide