LG AX5000 - Manual (Page 15)

AX5000 13
Getting Started with Your Phone
The Battery
N NO OT TE E It is important to fully charge the battery before initial
use of the phone.
The phone comes with a rechargeable battery. Keep the
battery charged while not in use in order to maximize talk
and standby time. The battery charge level is shown at
the top of the LCD screen.
Installing the Battery
To install the battery, insert the battery into the opening
on the back of the phone. Put the battery cover on the
battery and push it slightly upwards.
Removing the Battery
Turn the power off. While pressing the PUSH button on
the back of the phone, pull the battery cover downwards
and remove it. Then remove the battery by pressing the
upper area of it.
Charging the Battery
To use the charger provided with your phone:
Warning! Use only the charger provided with the phone.
Using any charger other than the one included with the
AX5000 may damage your phone or battery.
1. Plug the end of the adapter into the phone’s charger
port and the other end into an electrical outlet.
2. The charge time varies depending upon the battery
level. The maximum charge time for a fully discharged
battery is 3.5 hours.
Battery Charge Level
The battery charge level is shown at the top right of the
LCD screen. When the battery charge level becomes low,
the low battery sensor alerts you in three ways: sounding
an audible tone, blinking the battery icon, and displaying
Low Battery . If the battery charge level becomes
exceedingly low, the phone automatically switches off
and any function in progress is not saved.
Fully Discharged Fully Charged
AX5000-(E)_Alltel_1.1.qxd 12/22/05 5:22 PM Page 13