LG AX5000 - Manual (Page 67)

AX5000 65
5.8 Application Mode
Allows you to use the general application and restricts the
output of RF communication.
1. Press , , , .
3. Select On / Off then press .
6. Data Settings
This menu allows you to use wireless data communication
services. Wireless data communication services refers to the
utilization of subscriber terminals for access to the internet with
personal computers or laptops at 19.2 Kbps or at a maximum of
230.4 Kbps. The connection speed depends on your carrier’s
network and other variables. Contact communication
information specifications must match the network.
6.1 Data/Fax
Allows you to use your phone to transmit data and faxes.
1. Press , , , .
2. Select Off / Fax In Once / Fax In Always / Data In Once /
Data In Always then press .
NOTE : The Data Connection Kit allows you to connect your
PC or PDA to your LG wireless phone, freeing you from having
to locate a telephone outlet. You can send or receive an e-mail,
a fax, or access the Internet anytime, anywhere.
6.2 PC Connection
Allows you to set the data port and port speed. Set the port
speed based on your carrier’s network. Contact your carrier to
determine the maximum available speed.
1. Press , , , .
2. Select USB / RS-232C(COM Port) / Closed then press .
3. After choosing RS-232C(COM Port) select 19200 bps /
115200 bps / 230400 bps / then press .
NOTE : When using 1X HSPD data service via an RS-232C
data cable, the port speed is set to 115,200 (230,400 is not
supported).
6.3 Mode(1X/QNC)
Allows you to select the connection speed.
1. Press , , , .
2. Select Auto / 1x Only / QNC Only then press .
AX5000-(E)_Alltel_1.1.qxd 12/22/05 5:23 PM Page 65