Lincoln Electric POWER WAVE WELDING SYSTEMS - Manual (Page 11)

Caster Kit - Light Duty
Mounts to the wire reel stand on the
Power Feed 10 and Power Feed 10
Dual. Allows for easy movement of
wire feeder. Order K1556-1.
Insulated Lift Bail
Allows the entire wire
feeder to be hung from
a crane or hook.
Order K1555-1.
(Power Feed
10 only.)
Undercarriage
Includes mounting frame, front cast-
ers, rear wheels and handle for hand
towing. Order K163.
Feed Plate Incoming Bushing
Connects directly to Magnum plastic
conduit (not included), for use in boom
systems, long distances, or large pay-
off packages.
For .025-1/16” wire, Order K1546-1.
For 1/16-1/8” wire, Order K1546-2.
K1546-1
K683-3
11
RECOMMENDED
OPTIONS
Undercarriage
Platform undercarriage for mounting
two gas cylinders at rear of welder.
Order K1570-1.
Wire Straightener
For use with 10-Series wire drives or
separately mounted. Straightens
cored wire up to 1/8” (3.2mm) and
solid wire up to 3/32” (2.4mm).
Incoming and outgoing bushings are
compatible with existing incoming and
gun receiver bushings.
Order K1733-1.
Dual Procedure Switch
Allows the use of two welding proce-
dures with one Lincoln Magnum gun.
15 ft. (7.6m). Must be used with
optional Dual Procedure Panel or Dual
Procedure with Memory Panel.
Order K683-3.
Gas Guard Regulator
For CO
2
and Argon blend gases.
Reduces surge caused by excess
pressure in supply hose. Includes
adjustable flow regulator with remov-
able adjustor key. Used with standard
regulator. Kit provides for one gun.
Order K659-1.
K1556-1
K1733-1