Lincoln Electric POWER WAVE WELDING SYSTEMS - Manual (Page 8)

MAGNUM GUNS
The following guns come pre-assembled
with liner and gun connector that is
compatible with the Tweco #2-#4 gun
receiver bushing (K1500-2). They con-
nect directly to the standard Power Feed
10 and 10 Dual. Gun cables are 15 ft.
length:
K471-21 Magnum 400 .035-.045
K471-22 Magnum 400 .052-1/16”
K471-23 Magnum 400 1/16-5/64”
K497-20 Magnum 200 .025-.030
K497-21 Magnum 200 .035-.045
FEED PLATE GUN
RECEIVER BUSHINGS
One of the following Gun Receiver
Bushings is required for connecting
gun and cable assemblies to the
feed plate.
Feed Plate Gun Receiver
Bushing K1500-X.
K1500-2 comes standard with
feed head (as shown).
Connector Kit for
Magnum Guns
(K466-10 or K613-7)
K1500-3 K1500-4 K1500-2 K1500-1
K1500-1 Gun Receiver
Bushing (Optional)
• Magnum 200, 300 and 400
gun and cable assemblies
with K466-1 connector kit.
• Lincoln Innershield ® gun and
cable assembly.
• Fast-Mate ™ gun and cable
assembly with K489-2
Fast-Mate Adapter Kit.
• Magnum 550 gun and cable
assembly with K613-1.
K1500-2 Gun Receiver
Bushing (1) (Standard)
• Magnum 200 and 400 fully
assembled guns (K497-2X
and K471-2X). See below.
• Magnum 200, 300 and 400
gun and cable assemblies
with K466-10 connector kit.
• Guns with Tweco ® #2, #3
and #4 connectors.
(1) This gun receiver bushing
comes standard with each
feed head.
K1500-3 Gun Receiver
Bushing (Optional)
• Magnum 550 gun and cable
assembly with K613-7
connection.
• Guns with Tweco #5
connectors.
K1500-4 Gun Receiver
Bushing (Optional)
• Magnum 200, 300 and 400
gun and cable assemblies
with K466-3 connector kit.
• Guns with Miller ® connectors
(for new, longer connectors).
K489-7 Fast Mate Gun
Receiver Bushing
• Magnum gun and cable
assemblies with Fast Mate
connectors.
K489-7
8