Lennox Hearth AX45Q - Manual (Page 58)

AX45Q
58 AX45Q User’s Manual
2.4.6 APM Configuration
You can use this screen to select options for the APM settings. Use the up and down
<Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the value of
the selected option. The settings are described on the following pages. The screen is
shown below.
y Power Management/APM
This item allows you to set APM to Enabled or Disabled.
y Restore on AC Power Loss
This item allows you to set AC Power Loss to Power Off, Power On, or Last State.
y Throttle Slow Clock Ratio
Select the Duty Cycle in Throttle mode. The choices are 87.5%, 75.8%, 6.5%, 50%, 37.5%,
25% and 12.5%.
y Resume On Ring
Disable or Enable RI to generate a wake event.