Lennox Hearth AX45Q - Manual (Page 65)

User’s Manual
AX45Q User’s Manual 65
card’s manual first, before modifying the default settings in the BIOS.
2.5.6 PCI IDE BusMaster
Set this value to allow or prevent the use of PCI IDE busmastering. The setting is Disabled.
Option Description
Disabled Set this value to prevent PCI busmastering. This is the default setting.
Enabled This option specifies that the IDE controller on the PCI local bus has mastering
capabilities.
2.5.7 OffBoard PCI/ISA IDE Card
Set this value to allow the OffBoard PCI/ISA IDE Card to be selected. The default setting is
Auto.
Option Description
Auto This setting will auto select the location of an OffBoard PCI IDE adapter card.
This is the default setting.
PCI Slot 1 This setting will select PCI Slot 1 as the location of the OffBoard PCI IDE
adapter card. Use this setting only if there is an IDE adapter card installed in
PCI Slot 1.
PCI Slot 2 This setting will select PCI Slot 2 as the location of the OffBoard PCI IDE
adapter card. Use this setting only if there is an IDE adapter card installed in
PCI Slot 2.
PCI Slot 3 This setting will select PCI Slot 3 as the location of the OffBoard PCI IDE
adapter card. Use this setting only if there is an IDE adapter card installed in
PCI Slot 3. This option is available even if the motherboard does not have a
PCI Slot 3. If the motherboard does not have a PCI Slot 3, do not use this
setting.
PCI Slot 4 This setting will select PCI Slot 4 as the location of the OffBoard PCI IDE
adapter card. Use this setting only if there is an IDE adapter card installed in
PCI Slot 4. This option is available even if the motherboard does not have a
PCI Slot 4. If the motherboard does not have a PCI Slot 4, do not use this
setting.
PCI Slot 5 This setting will select PCI Slot 5 as the location of the OffBoard PCI IDE
adapter card. Use this setting only if there is an IDE adapter card installed in
PCI Slot 5. This option is available even if the motherboard does not have a
PCI Slot 5. If the motherboard does not have a PCI Slot 5, do not use this
setting.
PCI Slot 6 This setting will select PCI Slot 6 as the location of the OffBoard PCI IDE
adapter card. Use this setting only if there is an IDE adapter card installed in
PCI Slot 6. This option is available even if the motherboard does not have a
PCI Slot 6. If the motherboard does not have a PCI Slot 6, do not use this