Loewe Individual Sound Speaker System - Manual (Page 19)

19 -
Deutsch
English
Français
Italiano
Español
Nederlands
Connect the cables as shown in the graphic:
Connect Auro to socket AV of the Loewe Flat TV. You must use a Euro-AV
cable in which all contacts are wired.
To get a better picture quality, use a three-wire cinch cable (available from
your dealer) and connect it to Auro “COMPONENT VIDEO OUT” and “SD/HD-
COMPONENT IN” of the TV set. Set the “VIDEO OUT SELECTOR” switch on the
back of Auro to the “COMP.” position.
With a six-wire cinch cable (available from your dealer), connect the cinch
socket group “PRE-OUT” of Auro to the cinch socket group “Line-IN”  of the
subwoofer. Connect the sockets as follows:
- Auro socket “Preout C” to subwoofer socket “Line IN Center”;
- Auro socket “Preout LFE” to subwoofer socket “Line IN Subw.”;
- Auro socket “Preout L” to subwoofer socket “Line IN Front Left”;
- Auro socket “Preout R” to subwoofer socket “Line IN Front Right”;
- Auro socket “Preout SL” to subwoofer socket “Line IN Surr. Left”;
- Auro socket “Preout SR” to subwoofer socket “Line IN Surr. Right”.
•
•
•
Connect the cubic plug cable from the “System connector” socket  on the
subwoofer to the cubic socket on Auro (the side of the cable with anti-kink).
The cubic plugs are secured in the socket by a lug.
You have to press down the lug first before you can remove the cubic plug.
To use the TV as a center loudspeaker connect “AUDIO IN C” on the TV set to
“PRE OUT C” on the DVD Preceiver with a cinch cable (the connection of the
center cable “C” between Auro and Individual Sound is omitted).
To play the TV sound over Auro/Individual Sound, connect the digital audio
output of the TV set “AUDIO DIGITAL OUT” with the “DIGITAL IN” input from
Auro with a cinch cable.
Before establishing the L-Link, Auro and the TV must be in the powerless
state otherwise these devices cannot identify each other after switching on.
Audio cable cinch -> SCART (available from your dealer) when using the
component signal and “TV as center speaker”. •
•
•
•
•
PREOUT
L C R L L
SL LFE SR R R
TO TV
AUX1 IN
DIGITAL
IN
DIGITAL
OUT TV
L-LINK 12V / 15mA
EXT
AUX OUT AUX 2
Loewe Flat-TV
Loewe
Auro
AV2-SCART
SERVICE
CENTER AUDIO OUT L/R
DIGITAL OUT COMPONENT IN
COMPONENT VIDEO OUT
Y
Pb
Pr
Loewe Individual Sound System
ON
Line IN
Power OUT
OFF
230V~50/60Hz
Surr.
Front
Right
Surr.
Front
Subw. Left
Right Center Left
R
R
L
C
L
Bass Intensity
Phase
Min. Max.
0 180
Crossover Frequency Audio Link
System connector
50 250.
L SL SR R C LFE L SL SR R C FLE
Wiring Loewe Flat TV – Auro – Individual Sound (L2650)
Audio cable cinch -> SCART
(available in specialised
trade)
Only necessary for TV as
a center loudspeaker
L-Link-cable
Cubic plug cable
Component Video
(available in specialised
trade)
EURO-AV-cable
Six-pole cinch
Digital audio TV -> Auro
Connection