Leupold Rx-600 - Manual (Page 15)

12
For rifle users, RFL mode is comprised of three TBR
functions: HOLD, MOA, and BAS . One of these modes
must be selected . To select the desired function, navigate
through the Quick Set Menu until RFL is reached (activate
if necessary) . While the RFL icon is highlighted and the
word “SEt” is shown in the upper display, press and release
POWER repeatedly to scroll through HOLD, MOA, and BAS
respectively; press MODE when the desired function is
displayed . For information regarding BOW settings, please
see pages 22-23 .
BaS displays the equivalent horizontal range, which is based
upon the ballistics group and sight-in distance you will
choose in a later mode. this is the range you will want to use
when shooting, rather than the line of sight distance, which
may contain gross errors depending upon the shot angle.
readings will be displayed with equivalent horizontal range.
the upper display shows the true Ballistic range and the
lower display shows the line-of-sight distance to the target.
HoLd will display the appropriate amount of holdover to
use, which is based upon the ballistics group and sight-in
RFL
RFL
RFL