Leupold Rx-600 - Manual (Page 8)

5
Battery Power StatuS IndIcator
To determine your battery’s power level, look for the following indicators:
FULL – A full battery bar indicates your battery is at or near peak capacity .
HALF – A half-full bar indicates your battery has reached half-capacity .
LOW – If the battery bar is empty, yet there is still data displayed above the bar, the
battery is nearing the end of its life and should be replaced .
NO POWER – If the battery bar is empty, and there is no data displayed above the
bar, your battery is dead and you must replace it . The battery status bar will flash
and the unit will shut down when no power remains .
MeaSurInG dIStance wItH tHe rX-600 / 750
Measurement of distance with the RX-600 / 750 is a very simple operation:
View the object of interest through the monocular . 1 .
Depress the POWER button to power up the unit . 2 .
Align the reticle over the object being viewed . 3 .
Depress the POWER button again – this will cause the laser to activate . 4 .
Read the distance as shown in the image field . 5 .