Linksys SRW2024 - Manual (Page 92)

82 Chapter 5: Using the Web-based Utility for Configuration
SNMP Tab - Communities
WebView Switches
The Add to List button adds the Group Membership configuration to the respective table at the bottom of the
screen.
SNMP Tab - Communities
The Communities screen contains three areas, Communities, Basic Table and Advanced Table.
SNMP Management Station. Defines the management station IP address for which the advanced SNMP
community is defined. There are two definition options:
• Define the management station IP address.
• All. Includes all management station IP addresses.
Community String. Defines the password used to authenticate the management station to the device.
Basic. Enables SNMP Basic mode for a selected community and contains the following fields:
Access Mode. Defines the access rights of the community. The possible field values are:
• Read Only. Management access is restricted to read-only, and changes cannot be made to the
community.
• Read Write. Management access is read-write and changes can be made to the device configuration, but
not to the community.
• SNMP Admin. User has access to all device configuration options, as well as permissions to modify the
community.
View Name. Contains a list of user-defined SNMP views.
Advanced. Enables SNMP Advanced mode for a selected community and contains the following fields:
Group Name. Defines advanced SNMP communities group names.
The Add to List button adds the Communities configuration to the respective Table at the bottom of the screen.
Base Table
Management Station. Displays the management station IP address for which the basic SNMP community is
defined.
Figure 5-59: SNMP - Communities