Linksys SRW2024 - Manual (Page 96)

86 Chapter 5: Using the Web-based Utility for Configuration
Admin Tab - Jumbo Frames
WebView Switches
Admin Tab - Jumbo Frames
Jumbo Frames. This option enables the transportation of identical data in fewer frames. This ensures less
overhead, lower processing time and fewer interruptions.
Admin Tab - Static Address
A static address can be assigned to a specific interface on this switch. Static addresses are bound to the
assigned interface and cannot be moved. When a static address is seen on another interface, the address will be
ignored and will not be written to the address table.
Interface. Displays the interface to which the entry refers:
• Port. The specific port number to which the forwarding database parameters refer.
• LAG. The specific LAG number to which the forwarding database parameters refer.
MAC Address. Displays the MAC address to which the entry refers.
VLAN ID. Displays the VLAN ID number to which the entry refers.
VLAN Name. Displays the VLAN name to which the entry refers.
Status. Displays how the entry was created. The possible field values are:
• Permanent. The MAC address is permanent.
• Delete on Reset. The MAC address is deleted when the device is reset.
• Delete on Timeout. The MAC address is deleted when a timeout occurs.
• Secure. The MAC Address is defined for locked ports.
Query
Port. Specifies the interface for which the table is queried. There are two interface types from which to select.
• Port. The specific port number.
• LAG. The specific LAG number.
MAC Address. Specifies the MAC address for which the table is queried.
Figure 5-63: Admin - Jumbo Frames
Figure 5-64: Admin - Static Address
NOTE: The Jumbo Frames tab is not an available
option on the SRW224G4 and SRW248G4 Switches.