Liebert Liqui-tect 300 - Manual (Page 6)

2
Placement on Subfloor Under Cooling Support Equipment
(Other applications such as drip pans and ceiling pipe trays can be
monitored)
As shown above, the Liqui-tect 300 (LT300) may be placed on a sub-
floor within the leak detection zone—the area directly beneath the
unit being protected or other areas such as the unit drip pan or ceiling
pipe trays.
The LT300 is a two-wire connection to the Liebert environmental unit.
A separate 24VAC power supply is not required for this sensor.
NOTE: For a downflow unit, the LT300 sensor must be located six feet
in front of the unit.
Leak detection
zone (directly
beneath unit)
To a Liebert
environmental unit
LT300