Lindy 42803 - Manual (Page 5)

Configuration
Initial Operation
To use the MiniCam, you must launch the
AMCap application. Select:
The lower part of the drop-down menu allows
you to select the audio input device. Ensure
that ‘USB Camera’ is ticked.
If you don’t see anything in the AMCap window, ensure
that ‘USB PC Camera with Mic’ is selected in the Devices
drop down menu.
Start > All Programs > USB PC Camera Plus >
AMCap
The AMCap window will open and display
the output from the MiniCam.
Rotate the
lens to focus.
Press this button to switch the
white LEDs on; press again to
switch off.