Lindy 42803 - Manual (Page 6)

Configuration
Setting up the microphone
For correct microphone operation you must follow the procedure below.
Open the windows Sound Recorder application: Start > Control Panel > Sounds and Audio Devices
1. Click on the Audio tab; make sure that USB Camera is set as the default sound recording device.
2. Click the Volume button. In the window that
appears, you can raise the volume control for the
MiniCam’s built-in microphone. For most purposes a
setting of about ¾ of the way
up will suffice.
3. Close the volume control
window by clicking the ‘X’ in
the top right hand corner,
then, in the Audio Properties
window, click Apply and then
OK, to save the settings.