Lexicon MPX 550 - Manual (Page 32)

Basic Operation
Lexicon
2-4
STORING PROGRAMS
The User Bank contains no programs when the MPX 550
is shipped. However, it includes 64 memory locations
available for storing user-modified programs.
To store a program:
1. Press the Store button. The Store and
Tap/Cancel LEDs will light to indicate that
the store function is armed. The first empty
User Bank location will be selected.
To cancel the store function without saving
the program, press the Tap/Cancel button.
This can be done at any time before the
store procedure is completed.
2. Use the PROGRAM knob to select a different User
Bank location. The message area on the front panel
display (see page 1-6) indicates whether the selected
User Bank location is available or empty.
3. The program appears on the front panel with its
original name and a numeric suffix. If desired, use
EDIT knobs 1 and 3 to change the name of the
program.
4. Press the Store button to save the program to the
selected location. The message "Stored" will appear
briefly on the display. The Edit LED will no longer be
lit when the saved version becomes the selected
program.
Note:
When storing a user program, allow the unit to
complete the entire store process before powering
the unit off. If the unit is power cycled during the
process, all previously stored programs may be lost.