Lexicon MPX 550 - Manual (Page 37)

System Mode
Lexicon
3-2
SYSTEM MODE FUNCTIONS
System Mode can be used to set System Mode
parameters, execute MIDI Dumps, and restore
default settings. To enter System Mode, press
the front panel System button. The System LED will light
to indicate that System Mode is active.
The tables that begin at the right show System Mode
functions. EDIT knob 1 selects the desired function, and
EDIT knob 3 changes the parameter setting (if
applicable). Changes to System Mode parameters are
effective immediately. MIDI Dumps and Restore Default
Commands require confirmation to execute.
To exit System Mode, press the System button again.
Detailed descriptions of all System Mode functions begin
on page 3-4.
Parameter Settings
Output Level 0dB* to -31dB
Off
Input Source Analog Stereo*
Analog Mono L,
Analog Mono R
S/PDIF Digital
Clock Source Internal 44.1kHz*
Internal 48kHz
External (S/PDIF)
Digital Output Processed*
Dry
Mix Mode Program*
Global
Bypass Mode Dry*
Full Mute
Input Mute
Program Load Mode Bypass Dry*
Full Mute
Tempo Mode Program*
Global
Compressor Mode Program*
Global