Lightolier Alter Smart Vision QVS2GPFOB2FT User Manual

Qvs2gpfob2ft, Alter smartvision, Mounting methods/features dimensions

Advertising
background image

ALTER SMARTVISION

2’ X 2’ RECESSED DIRECT/INDIRECT FLUORESCENT
2 LAMP, TT5 BI-TUBE, 5 1/2” DEEP
MICROPERFORATED MESH LAMP SHIELD
STATIC

Efficiency 58.5%.
Broadcast 4: Broadcast control requires no programming of

the iGEN ballasts. Dimming message are sent with a global

address from the master Alter Smart Vision luminaire

to up to 3 slaves luminaire with an iGEN address able

ballast (DA). Each ballast receives the same command and

responds unifomity.
Swing down microperforated lamp shield for easy

relamping and maintenance.
Lamp shield specially cut to accomodate Smart

Vision sensor.
Alter soft white film on inside of mesh conceals lamp

image providing balance between reflected and

direct light.
Fully recessed luminaire and lamp compartment.
95% Reflective Alter soft white paint finish.
Specular interior reflector.
One piece body for easy installation.
Easy access to ballast through lamp

compartment.
Fits standard T-Grid ceilings.
Optional acrylic drop-down visual element.

MOUNTING METHODS/FEATURES

DIMENSIONS

FIXTURE TYPE

JOB INFORMATION:

VOLTS

L10-80

QVS2GPFOB2FT

Swing down optical system for

easy relamping and maintenance

Microperforated mesh lamp shields

Ceiling compatibility

Suited to standard exposed T-grid

ceilings

Suited to standard exposed Slot T-grid ceilings

2 x 40W

Genl

yt

e Thomas Com

pan

y

integrated motion and light sensor with

optional dimming infrared remote control

Advertising