Lightolier Alter Smart Vision QVS2GPFOB2FT - Manual (Page 2)

ORDERING INFORMATION
Explanation of Catalogue Number Example: QVS2GPFOB2FT120DS
SPECIFICATIONS
MATERIALS: One piece chassis constructed from die formed 20 gauge
cold rolled steel. Reflectors - 95% reflectance baked white acrylic matte
paint finish. Specular aluminum interior reflector. Soft white acrylic film on
inside of lamp shield conceals lamp image.
FINISH: Chassis exterior - phosphate undercoating, baked white acrylic
matte paint finish.
ELECTRICAL: Rapid start HPF, thermally protected class “P” ballast (Bi-tube
type). If K.Os are within 3” of ballast use wire suitable for at least 90C.
LABELS: Listed by CSA, UL
QVS2GPFOB2FT
QVS
QUALITY
VISUAL
STATIC
2
FIXTURE
WIDTH
G
CEILING
TYPE
PF
LAMP
SHIELD
LAMP
QUANTITY
LAMP/FIXTURE
LENGTH
120
VOLTAGE
120
DS
OPTIONS
Standard exposed
T-grid ceilings
(NOMINAL 24”)
FT = TT5
Bi-tube
R =Radio Interface Filter
Recessed direct
indirect soft light
optical system
PF =Micro-
perforated
BALLAST TYPE
DS = Gen Broadcast 4 Sensor/ iGEN
ballast*
* For other voltage, consult your
Lightolier representative.
LAMP SHIELD DETAILS
OB =One-piece lamp
shield with sensor
We reserve the right to change, materials and finish in any way that will not alter installed appearance or reduce function and performance.
ALTER SMART VISION
2’ X 2’ RECESSED DIRECT/INDIRECT FLUORESCENT
OB 2 FT
2’
Genlyte Thomas Company
631 Airport Road, Fall River, MA 02720 - Tel. (508) 679-8131
C.F.I. Division of Canlyte, Inc.
525 Education Road, Cornwall, Ontario
Canada K6H 6C7 - (613) 938-6221