Lynx L-210 - Manual (Page 32)

32
6. Lynx L-210 terms
What is a firewall?
A firewall is protection between the Internet and your local network. It acts similarly to the firewall in
your car, protecting the interior of the car from the engine. Your car's firewall has very small opening
that allow desired connections from the engine into the cabin (gas pedal connection, etc), but if
something happens to your engine, you are protected.
The firewall in the Lynx L-210 is very similar. Only the desired connections that you allow are
passed through the firewall. These connections are normally originating from the local network;
such as web browsing, checking your email, downloading a file, and playing a game. However, in
some cases, you can allow incoming connections so that you can run programs like a web server.
What is NAT?
NAT stands for Network Address Translation. Another name for it is Connection Sharing. What
does this mean? Your ISP provides you with a single network address for you to access the Internet
through. However, you may have several machines on your local network that want to access the
Internet at the same time. The Lynx L-210 provides NAT functionality that converts your local
network addresses to the single network address provided by your ISP. It keeps track of all these
connections and makes sure that the correct information gets to the correct local machine.
Occasionally, there are certain programs that don't work well through NAT. Some games, and some
specialty applications have a bit of trouble. The Lynx L-210 contains special functionality to handle
the vast majority of these troublesome programs and games. NAT does cause problems when you
want to run a SERVER though. When running a server, please see the DMZ section below.
What is a DMZ?
DMZ really stands for Demilitarized Zone. It is a way of separating out part of your local network so
that is more open to the Internet. Suppose that you want to run a web-server, or a game server.
Normal servers like these are blocked from working by the NAT functionality. The solution is to
"isolate" the single local computer into a DMZ. This makes the single computer look like it is directly
on the Internet, and others can access this machine.
Your machine isn't really directly connected to the Internet, and it really has an internal local
network address. When you provide the servers network address to others, you must provide the
address of the Lynx L-210. The Lynx L-210 "fakes" the connection to your machine.
You should use the DMZ when you want to run a server that others will access from the Internet.
Internal programs and servers (like print servers, etc) should NOT be connected to the DMZ
What is a Gateway?
The Internet is so large that a single network cannot handle all of the traffic and still deliver a
reasonable level of service. To overcome this limitation, the network is broken down into smaller
segments or subnets that can deliver good performance for the stations attached to that segment.
This segmentation solves the problem of supporting a large number of stations, but introduces the
problem of getting traffic from one subnet to another.
To accomplish this, devices called routers or gateways are placed between segments. If a machine
wishes to contact another device on the same segment, it transmits to that station directly using a
simple discovery technique. If the target station does not exist on the same segment as the source
station, then the source actually has no idea how to get to the target.