Lennox Hearth JX10 CARA - Manual (Page 6)

GB
RU
PL
TR
CZ
HU
AR
Instruction: Duration of press
Tap Press briefly
Double Tab 2 quickly repeated Taps
Press Approx: 1 second
Press and hold Approx: More than 3 seconds
6
GB
RU
PL
TR
CZ
HU
AR
Jabra JX10 cara Bluetooth headset 7 Jabra JX10 cara Bluetooth headset
What your headset can do
Your Jabra JX10 cara lets you do all this (dependent on your phone supporting the function:
• Answer calls
• End calls
• Reject calls*
• Voice dialling*
• Last number redialling*
• Call waiting*
• Put call on hold*
* Phone dependent
Specifications
• Up to 6 hours talk time/standby time up to 200 hours
• Rechargeable battery with charging option from AC power supply, PC via USB cable, desktop charger
or car charger
• Less than 17 grams
• Operating range up to 10 metres (approx. 33 feet)
• Headset and hands-free Bluetooth profiles
• Bluetooth specification (see glossary) version 1.2
GETTING STARTED
The Jabra JX10 cara is easy to operate. The answer/end button on the headset performs different functions
depending on how long you press it.
4
3
2
When the LED is green, it is fully charged.
Charge from your desktop holder
Connect your USB cable/AC power adaptor to the desktop holder. Place your JX10 cara in the desktop holder
as shown in fig. 3
Please note: The lifetime of the battery will be significantly reduced if your device is left uncharged for a long
period. We therefore recommend that you recharge your device at least once a month.
Turning your headset on and off
• Press the answer/end button to turn on your headset.
• Press and hold the answer/end button to turn off your headset.
Pair it with your phone
Before you use your Jabra JX10 cara, you need to pair it with your mobile phone.
1. Put the headset in pairing mode
• Make sure the headset is on.
• Press the pairing button marked .
2. Set your Bluetooth phone to ‘discover’ the Jabra JX10 cara
Follow your phone’s instruction guide. This usually involves going to a ‘setup,’ ‘connect’ or ‘Bluetooth’ menu
on your phone and selecting the option to ‘discover’ or ‘add’ a Bluetooth device. * (See example from a typical
mobile phone in fig. 6).
3. Your phone will find the Jabra JX10 cara
Your phone then asks if you want to pair with it. Accept by pressing ‘Yes’ or ‘OK’ on the phone and confirm
with the passkey or PIN = 0000 (4 zeros). Your phone will confirm when pairing is complete. In case of
unsuccessful pairing, repeat steps 1 to 3.
Wear it how you like it
The Jabra JX10 cara is ready to wear on your right ear. If you prefer the left, gently remove the earhook and
rotate to fit left ear. (See fig. 4)
Make sure that your Jabra JX10 cara headset is fully charged before you start using it. Use the AC adaptor to
charge from a power socket, or charge directly from your PC with the USB cable provided, or through your
carcharger - see fig. 3. Connect your headset as shown in fig. 2.
When the LED is solid red, your headset is charging.
1
Charge your headset