Lennox Hearth JX10 CARA - Manual (Page 7)

GB
RU
PL
TR
CZ
HU
AR
8
GB
RU
PL
TR
CZ
HU
AR
Jabra JX10 cara Bluetooth headset 9 Jabra JX10 cara Bluetooth headset
5 How to…
Answer a call
• Tap the answer/end button on your headset to answer a call.
End a call
• Tap the answer/end button to end an active call.
Make a call
• When you make a call from your mobile phone, the call will (subject to phone settings) automatically
transfer to your headset. If your phone does not allow this feature, tap on the Jabra JX10 cara’s answer/
end button to transfer the call to the headset.
Reject a call*
• Press the answer/end button when the phone rings to reject an incoming call. Depending on your
phone settings, the person who called you will either be forwarded to your voice mail or hear a busy
signal.
Activate voice dialling*
• Press the answer/end button. For best results, record the voice-dialling tag through your headset. Please
consult your phone’s user manual for more information about using this feature.
Redial last number*
• Double Tap the answer/end button when the headset is on and not used.
Adjust sound and volume
• Press the volume up or down (+ or -) to adjust the volume. (Show fig 1).
Call waiting and placing a call on hold*
This lets you put a call on hold during a conversation and answer a waiting call.
• Press the answer/end button once to put the active call on hold and answer the waiting call.
• Press the answer/end button to switch between the two calls.
• Tap the answer/end button to end the active conversation.
* Functions marked with * are dependent on your phone supporting these features.
Check your phone’s user manual for further information.
What does this mean about your headset
Flashing every second: active on a call
Flashing every three seconds: in standby mode
Running low on battery
Charging
Fully charged
In pairing mode – see section 3
What you see
Flashing blue light
Flashing blue light
Flashing red light
Solid red light
Solid green light
Solid blue light
6
What the light means
Jabra JX10 cara is capable of having two mobile phones connected to the headset at the same time. This will
give you the freedom of having only headset to operate both your mobile phones and the operation of the
functions in the headset functions as described in section 5.
Only it must observed that Last Number Redial will dial the number from the last outgoing call, independent
of the mobile phones, and the Voice Dialling function only will work on the last paired mobile phone.
The Jabra JX10 cara can used along with the Jabra Bluetooth Hub (sold separately). This will enable you to
use the headset with both your mobile phone and your office phone.
To pair the Jabra JX10 cara with the Jabra Bluetooth Hub
The pairing process is a little different:
• Put your Jabra JX10 cara in pairing mode
• Put the Jabra JX10 cara in pairing mode.
• Place them close together. You do not need a dedicated pin code to pair
the two Jabra products. Consult the Jabra Bluetooth Hub user manual for
more information on how to connect the Bluetooth hub to your office phone.
The use of the Jabra JX10 cara with the Jabra Bluetooth Hub is very similar to using the headset with a mobile
phone only. The only difference lies in the transfer of a call to the headset from the office phone.
Transfer the call to the headset
• Tap the answer/end button to transfer the call from the office phone to the
headset via the Jabra Bluetooth Hub
The answering of a call from the office phone requires a hook lifter in order to have the Jabra JX10 cara
answer the call automatically.
7
Using Jabra JX10 cara with 2 mobile phones
8
Using a Jabra Bluetooth Hub