Lincoln Electric IDEALARC CV-400-I - Manual (Page 19)

C-1 ACCESSORIES C-1
FACTORY INSTALLED
OPTIONS/ACCESSORIES
There are no factory installed options/accessories on
the CV-400-I.
FIELD INSTALLED OPTIONS
REMOTE VOLTAGE CONTROL (K857)
The K857 consists of a control box with 25 feet (7.6
m) of four conductor cable. Installation of a K857
Remote Voltage Control in the CV-400-I requires a
K864 Remote Control Adapter. Refer to the instruc-
tions provided with the K857 for hookup to the CV-
400-I. When properly connected, and with the CV-
400-I Local-Remote Switch in the "Remote" position,
the K857 functions the same as the CV-400-I Voltage
Adjust control, enabling minimum to maximum output
voltage adjustment of the CV-400-I.
UNDERCARRIAGE (K835)
Includes front casters, a handle, a bracket, and a rear
wheeled platform that is capable of carrying one gas
cylinder. The CV-400-I lifting eye is not functional with
the K835 undercarriage installed.
TWO-CYLINDER UNDERCARRIAGE (K874)
Platform type undercarriage that can accommodate
either one or two gas bottles, or one gas bottle and a
Magnum water cooler. The CV-400-I lifting eye is not
functional when the K874 undercarriage is installed.
WIRE FEEDER SWIVEL MOUNT (K178-1)
Allows an LN-7 or LN-742 to be securely mounted on
the roof of a CV-400-I.
UNIVERSAL ADAPTER (K867)
Provides a means of connecting auxiliary equipment
to the wire feeder receptacle on the CV-400-I power
source. Consists of a 14-pin MS-type (Amphenol)
plug with 8 inch (0.2 meter) long flex leads, one for
each circuit present in the wire feeder receptacle. Not
required when using a standard wire feeder input
cable, such as a K480, with a Lincoln wire feeder.
COMPATIBLE LINCOLN EQUIPMENT
The CV-400-I is intended for use with the LN-7, LN-
742, and LN-25 wire feed units. Use the Cables / Kits
listed below to make connection easily:
LN-7 / LN-7GMA* Requires K480 Input Cable
LN-25 Requires K484 Jumper Plug Kit
LN-25 w/K444-1 Requires K864 Remote Control
Remote Voltage Adapter and K484 Jumper Plug
Control Kit Kit
LN-742 / LN-742H Requires K591 Input Cable
* European model CV-400-I does not provide 115 VAC auxiliary power for LN-7
models.
CV-400-I