4wd indicator lights, Modes of the control trac system, Driving – Lincoln 2011 Navigator User Manual

Page 244

Advertising
background image

4WD indicator lights

The indicator lights illuminate in the message center in the
reconfigurable telltale (RTT) location under the following conditions.
Refer to Warning lights and chimes in the Instrument Cluster chapter.
4X2 - Momentarily illuminates

when 2H is selected.

4X4 AUTO – Illuminates when

4X4 AUTO is selected.

4X4 – Illuminates when 4X4 is

selected.

Modes of the Control Trac

system

The Control Trac system functions
in three modes:
4X2 (2WD) delivers power to

the rear wheels only. The
message center will momentarily
display “4x2” when this mode is
selected. This is appropriate for
normal on-road driving on dry
pavement and provides best fuel economy.

4X4 AUTO provides electronic control four-wheel drive with power

delivered to all four wheels, as required, for increased traction. The
message center will display “4X4 AUTO” when this position is
selected. This mode is acceptable for all on-road driving but
recommended when wet pavement, snow, or loose gravel conditions
are expected.

4X4 provides electronically locked four-wheel drive power to front and

rear wheels. The message center will display “4X4” when this position
is selected. This position is not recommended for use on dry
pavement. This position is only intended for severe winter or off-road
conditions, such as deep snow, ice or shallow sand.

4x2

4x4

AUTO

4x4

4X2

4X4

AUTO

4X4

Driving

244

2011 Navigator (nav)
Owners Guide, 1st Printing
USA
(fus)

Advertising