High beams, Flash-to-pass, Daytime running lamps (drl) (if equipped) – Lincoln 2011 Navigator User Manual

Page 56: Panel dimmer control, Lights

Advertising
background image

High beams

Push the lever toward the
instrument panel to activate. Pull
the lever toward you to deactivate.

Flash-to-pass

Pull toward you slightly to activate
and release to deactivate.

Daytime running lamps (DRL) (if equipped)
Turns the fog lamps on at full intensity output. To activate:
• the ignition must be in the on position and

• the headlamp control must be in the off, parking lamps or autolamp

position.

WARNING: Always remember to turn on your headlamps at
dusk or during inclement weather. The Daytime Running Lamp

(DRL) system does not activate the tail lamps and generally may not
provide adequate lighting during these conditions. Failure to activate
your headlamps under these conditions may result in a collision.

PANEL DIMMER CONTROL

Use to adjust the brightness of the
instrument panel when exterior
lights are on.
• Rotate the thumbwheel from left

to right to brighten the instrument panel.

• Rotate the thumbwheel from right to left to dim the instrument panel.

• Rotate fully to the right (past detent) to turn on interior lamps.

Lights

56

2011 Navigator (nav)
Owners Guide, 1st Printing
USA
(fus)

Advertising