Lightwave Communications SCS3230 - Manual (Page 33)

A Lantronix Company SCS3230 System Administrator's Guide
15.00.038 - 33 - May 2002
The SCS3230 uses a script file to assist in the initial setup and configuration of the 3230
system. The script is intended for the first time the unit is turned on, in order to get the system
'up and running' as quickly as possible.
Note: In some of the following screens, the term "3220" may be found in place of the "3230"
which is found in the actual screens of the SCS3230 system.
The following section outlines the administration functions and commands.
The administration functions and commands are designed to enable the administrator to
configure the SCS3230 to fit the needs of the system application. User IDs, devices, terminals
and access rights may be configured using the administration commands.
Many commands may be abbreviated to one extent or another, but some may not be
abbreviated at all. For example, the command
VERSION may be abbreviated to VER, but
LCIUPDATE may not be abbreviated. See Appendix E for more information regarding
abbreviations.
6: SCS3230 Setup Script and
System Administration