Battery installation, Listening to the radio – Lenoxx Electronics 9190M User Manual

Page 3

Advertising
background image

IB-9190M(MX)-WM-E-090902

BATTERY INSTALLATION

Slide the BATTERY DOOR in the direction shown by

the arrow to open the door and insert 2 “AA” batteries,

taking care not to reverse the positive and negative

polarities.

Alkaline batteries are recommended

and will normally provide more playing

time.

•

Do not mix old and new

batteries.

•

Do not mix alkaline, standard

(Carbon-Zinc) or rechargeable

(Nickel-Cadmium) batteries.

NOTE:

•

Remove the batteries during long periods (about

30 days or more) of non-use, possible battery

leakage and corrosion can damage the set.

•

If the sound becomes weak and unclear, the

batteries may be weak. Replace both batteries at

once.

Congratulations! You now own a personal radio cassette

player, which is able to offer personal listening with your

headphones.

LISTENING TO THE RADIO

You may listen to the radio through the stereo headphones.
1. Insert the headphone plug into the HEADPHONE

jack.

2. Set the FUNCTION switch to AM or FM position.
3. Select the desired station with the TUNING control

(Adjust for clearest sound).

4. Adjust the VOLUME control for the most pleasing

sound.

5. When listening is completed, set the FUNCTION

switch to TAPE (RADIO OFF ) position.

As the headphone cord functions as the FM antenna, do

not bunch it up. Unwind and extend the cord as much as

possible.

--- 2 ---

Advertising