Tape play – Lenoxx Electronics 9190M User Manual

Page 4

Advertising
background image

IB-9190M(MX)-WM-E-090902

TO INSERT THE TAPE

CAUTION: Do not pull the door too strongly or you may

damage the door, treat this set with care

and it will last a long time.

--- 3 ---

TAPE PLAY

1. Check whether or not the tape is tight before it is

inserted.

2. Open the cassette door by hand, face the side to be played

toward you, and insert the cassette tape. Close the cassette

door.

3. Connect the headphones to the HEADPHONE jack

and adjust the headphone band for proper fit.

4. Press the PLAY button.

5. Adjust the VOLUME to control the sound level as you

like.

6. To skip portions of the cassette tape, press the FAST

FORWARD button.

7. To stop playing the cassette tape, press STOP button,

and the power source is also turned off.

(This set has a built-in auto-stop and the tape mechanism

will stop playing and shut off when it reaches the end of

the tape.)

8. To hear the other side of tape, flip it over and press

PLAY.

To keep the tape from tangling,

firmly wind the tape before

inserting it into the player.

TO HEAR THE SAME SONG AGAIN

1. Open the cassette door by holding the door as

shown and gently pulling it to you.

2. Insert the tape into the cassette holder ON THE

DOOR.

3. Close the cassette door gently till it clicks shut.

1. Remove the tape, flip it around to the other side and insert it.

2. Press FAST FORWARD button for a short time.

3. Remove tape, flip it around to the original side, re-insert and

press PLAY.

TAPE PLAYING

DIRECTION

FULL REEL ON

THE RIGHT SIDE

Use of a cassette with more

than 90 minutes, such as C-

120 (120 minutes), is not

recommended. The extreme

thinness of this tape may

damage this set.

Advertising