Lantronix UBox UBX4100 - Manual (Page 10)

3: Installing the UBox
The UBox package has two components: the UBox hardware and the UBox software.
Both have their own settings and configuration options.
This chapter includes the following topics:
‹ Installing the UBox Hardware
‹ Installing the UBox Software
‹ Uninstalling the UBox Device Server Software
Installing the UBox Hardware
Warning: Do not connect a USB device to the UBox until you have
finished installing the software and hardware. Chapter 4: Using USB
Devices on the Network walks you through the process of using your USB
devices.
Step 1- Connect the UBox to Your Network
1. Connect an Ethernet cable to the Ethernet port of the UBox.
Figure 3-1. Ethernet Connection
Ethernet Port
2. Connect the other end of the cable to your network.
If you do not have a network, you can connect the UBox directly to the Ethernet
port on your computer using an Ethernet crossover cable.
UBox User Guide 10