Using usb devices on the network, Overview, Connecting your usb device – Lantronix UBox UBX4100 User Manual
Page 15: Step 1 - connect a usb device to the ubox, Using usb devices on the network 15, Figure 4-1. connecting a usb device to the ubox, Apter, Using usb, Devices on the network
4: Using USB Devices on the Network
Overview
This chapter includes the following topics:
Connecting your USB device to the UBox's USB port.
Connecting to your networked USB device using the Lantronix UBox
software:
−
Using the Connect and Disconnect icons
−
Using the Auto Connect feature for printers
Use your USB device by means of the Lantronix UBox.
Note:
These instructions help you connect a USB device (e.g., a printer or
scanner) to the UBox for the first time. We recommend that you only
connect one USB device at a time. To connect additional devices, repeat
these instructions for each device.
Connecting Your USB Device
Step 1 - Connect a USB Device to the UBox
1. Connect your USB device to any USB port on the Lantronix UBox.
Figure 4-1. Connecting a USB Device to the UBox
USB Ports
UBox User Guide
15