Lincoln Electric VANTAGE 500 (CE) IM894-B - Manual (Page 26)

C-1 ACCESSORIES C-1
FIELD INSTALLED OPTIONS /
ACCESSORIES
K903-1 SPARK ARRESTOR - Includes a heavy gage steel,
approved spark arrestor, clamp and adapter for mounting to
the muffler exhaust pipe.
K704 ACCESSORY SET - Includes 35 ft. (10m) of elec-
trode cable and 30 ft. (9.1m) of work cable, headshield,
work clamp electrode holder. Cables are rated at 400
amps, 100% duty cycle.
K857 25 ft (7.6m) or K857-1 100 ft. (30.4m) REMOTE
CONTROL
Portable control provides same dial range as the output con-
trol on the welder. Has a convenient 6 pin plug for easy con-
nection to the welder.
K1858-1 Service Indicator Kit- Provides a GO / NO-GO
visual indication of air cleaner element useful service life.
Filter service based on restriction readings allows the
longest life possible from the filter and best engine protec-
tion.
K2641-2 Trailer - A 4-wheel steerable trailer for in-
plant and yard towing. Comes standard with a Duo-
Hitch™, a 2” Ball and Lunette Eye combination hitch.
WIRE FEEDER OPTIONS
K449 LN-25 - Includes internal contactor for across the arc
operation (no control cable). Provides “cold” electrode until
gun trigger is pressed. Includes gas solenoid. For spools up
to 44lb. (20 kg) spools.
K1870-1 LN-15 Across the Arc Wire Feeder.
Portable, lightweight, compact CC/CV unit for flux-cored and
MIG welding. Includes Gas Solenoid, adjustable flow meter
and internal contactor. For 10-15 lb. (4.5-6.8kg) spools.
Magnum ® Gun and Magnum ® Gun Connector Kit are
required for gas-shielded welding. Innershield Gun is
required for gasless welding.
K126-2 Magnum ® 350 Innershield Gun
K1802-1 Magnum ® 300 MIG Gun (for LN-25)
K470-2 Magnum ® 300 MIG Gun (for LN-15, Includes
Connector Kit)
K466-10 Connector Kit (for LN-15, K470-2)
K1500-1 Gun Receiver Bushing (for LN-15 & K126-2)
Note: See Wire Feeder IM manuals for appropriate Drive
Roll and Guide Tubes.
TIG OPTIONS
K1783-9 Pro -Torch® PTA-26V TIG Torch
Air Cooled 200 amp torch (2 piece) equipped with valve for
gas flow control. 25 ft. (7.6m) length.
KP509 Magnum ® Parts Kit for PTA-26V TIG Torch
Magnum Parts Kit provides all the torch accessories you
need to start welding. Parts kit provides collets, collet bod-
ies, a black cap, alumina nozzles and tungstens in a variety
of sizes, all packaged in an easy to carry reclosable sack.
K870 Foot Amptrol®
K963-3 Hand Amptrol®
K2347-1 Precision TIG 185 Ready-Pak(For AC TIG)
K2350-1 Invertec® V205-T AC/DC One-Pak™ Package
(For AC TIG)
PLASMA CUTTING
K1601-1 Pro-Cut 55-Cuts metal using the 3-phase AC gen-
erator power from the engine driven welder. Accepts 3-
phase power.
VANTAGE ® 500 (CE)