Lenoxx Electronics CR-186 - Manual (Page 8)

MAINTENANCE
Cleaning Tape Heads and
Tape Path
Wipe the heads, the pinch roller and the
capstan with a cleaning swab slightly
moistened with cleaning fluid or alcohol
after every 10 hours of operation for
optimum playback and recording quality.
After cleaning, insert a tape when the
areas cleaned are completely dry.
Cleaning the Cabinet
Clean the cabinet, panel and controls with
a soft cloth slightly moistened with a mild
detergent solution. Do not use any type of
abrasive pad, scouring powder, or solvent,
such as alcohol or benzene.
RECORD / PLAY BACK HEAD
PINCH ROLLER
CAPSTAN COTTON SWAB
ERASE HEAD
Notes for Cassette Tapes
1. Do not put a tape near a magnetic field,
such as a TV, or speaker. Magnetic
fields may reduce the tape sensitivity
or even erase the recording.
2. Do not store tape for any length of time
in a hot, moist or dusty place.
Precautions for Tapes
Before insert the tape into the cassette
player, check that there are no loose layers
of tape visible through the cassette center
window. Take up these loose layers using
a pencil or ball-point pen before inserting
the cassette into the player.
PROTECT YOUR FINE FURNITURE!
WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL BE PLACED UNDER THE SET WHEN
PLACING IT ON SURFACE WITH A NATURAL OR LACQUER FINISH.
CR-186_032200 NLv.2 E 7