LifeSource UC-322 - Manual (Page 11)

Deleting Weight Data Saved in Memory
The procedure below is an example of how to delete the weight data of
User 1 that was saved in memory.
1 With the scale turned off, press and
hold Switch 1.
To delete the weight data of User 2,
press and hold Switch 2.
2 Release the switch when “ - ”
appears. Then, press Switch 2 within
five seconds.
If Switch 2 is not pressed within five
s e c o n d s , t h e s c a l e t u r n s o f f
automatically.
3 After displaying the number of data
currently saved in memory for one
s e c o n d , t h e w e i g h t d a t a i s
displayed.
At this time, press and hold Switch
1 and Switch 2 at the same time.
4 Up to five dashes appear from the
right side of the display.
If the switches are released before the
display “ - - - - - ” appears, the scale
turns off automatically and does not
delete the weight data.
5 “End” appears and the scale deletes
the weight data in memory.
- 11 -