LifeSource UC-322 - Manual (Page 6)

- 6 -
Before Measuring Your Weight
Switching the unit of measure
A unit selection switch is provided on the underside of the scale so that you
can choose the unit to measure your weight, kg or lb.
Slide the switch to the lb side. : lb (weight) and ft-in (height)
Slide the switch to the kg side. : kg (weight) and cm (height)
Presetting Your Height
The scale can save a height between 1-8 ft
(increments of 0.1). The procedure below is
an example of how to preset the height of
User 1 to 5 ft 10.5".
1 With the scale turned off, press and
hold Switch 1.
To preset the height of User 2, press
and hold Switch 2.
2 Release the switch when “ - ”
appears. Then, press Switch 1 again.
3 The height currently set appears.
When the height has not been preset
(factory setting), “OFF” appears. Under
this condition, the BMI calculation is not
available.
4 Set your height.
Press Switch 1 to decrease the number
or Switch 2 to increase the number.
Press and hold the switch to increase
or decrease the number continuously.
The setting range is 1-8 ft. When the
number reaches 8, “OFF” appears and
the number returns to 1.
5 After five seconds, the height is
saved in memory. “End” appears
and the scale turns off automatically.