LevelOne FCS-1030 - Manual (Page 16)

- 8 -
Function buttons
Click on this button to modify the settings of the selected devices. For more detail,
please refer to 0 Setup.
Click on this button to upgrade the firmware of the selected devices. For more
detail, please refer to 0 Upgrade.
Click on this button to reset the selected devices to default settings.
Click on this button to close the Installation Wizard.
Click on this button to get information about the Installation Wizard.
Setup
When you select one or multiple devices (of the same model) , the “Setup” button will be enabled.
Click on it to modify the settings of the selected device(s). After clicking on the “Setup” button,
Installation Wizard will try to connect to the selected device(s). If the authentication is failed, it will
popup a dialog) to ask for correct password and http port number.
Click on this button to back to the previous page or main page Click on this button to back to the previous page or main page
Click on this button to back to the previous page or main page Click on this button to back to the previous page or main page